Box 867 Shelbyville, TN 37162 Ph: 1-800-686-9887

             E-MAIL:garhawk@bellsouth.net

Custom-Made Holding Systems
for all General Aviation Aircraft

GarHawk Holding Systems are machined from solid aluminum and custom fitted to your airplane.  No tools are required for mounting and the entire System can be removed in seconds.


We'll securely hold your GPS, Chart/Map board, Handheld Radio, Note/Clearance Pad, or even your Notebook Computer while you fly the airplane and, we'll do it better than anyone!

In less than 5 seconds, the Chart/

Map board has been replaced

by the handheld GPS!

(see Accessories for GT 195 Kit for Garmin GPS 195)

All GarHawk Holding Systems rotate 360 degrees vertically, horizontally, and tilt 180 degrees in any direction.  Simply set the pressure control and treat it like the rear view mirror in you car.  No fumbling, tightening and loosening knobs to make adjustments - simply adjust your viewing angle as you would your rear view mirror - with one hand!

Just as quickly, we have replaced the

GPS with the Chart/Map board and

attached an approach chart!

 

The GarHawk System can be mounted to either the pilot or co-pilot yoke.  Better yet, order one System for each yoke!

To have us custom build a GarHawk Holding System for your airplane, simply take the three measurements as shown in the drawing below and give us a call on our 800 686 9887 toll free line.   We're always happy to talk with a fellow pilot and, we'll begin building your custom fitted GarHawk Holding System today!

A = Diameter of Control Rod

B  = Distance from top of Control Rod
        to top of wheel at the center.

C = Beginning of Control Rod to front
        of wheel.  


The GarHawk Corporation - Shelbyville, TN